Trouble shooting – Yetter 1310-010 Maximizer User Manual
Page 10
10
TROUBLE SHOOTING
This is a list of many of the possible problems, causes and solutions to problems that you may
encounter. If you have a problem that is not covered, please contact your dealer or Yetter
Manufacturing Co. at 1-800-447-5777. Before you call, please have your operator’s manual and the
model number of the machine.
PROBLEM
Belt edge is frayed
Tender belt will not turn
Engine will not start
CAUSE
Belt not aligned
V-belt is loose
Key sheared on pulley
Fuel shut off
Poor battery connection
or dead battery
SOLUTION
Align and tension belt.
Make certain belt is not
Rubbing against anything
Tighten V-belt
Replace key
Turn on fuel
Tighten cable connection
and charge battery
Electric switch will not
work.
Seed will not flow
Tender tube will not rise
Poor connection.
Broken wire
Blockage exists
Dead battery
Broken wire or switch
Check connections
Test wire for continuity
Remove blockage
Charge battery
Test wire for continuity