Yetter 2967-180 Residue Manager for 2959 Offset Injection Coulter - Manual (Page 7)

7
ASSEMBLY INSTRUCTIONS
STEP 2. Attach the 2967-270 R.M. arm to the coulter arm using the 5/8” x 9” bolt, 4) 5/8”
flat washers, 2) pivot bushings (2967-553) and 5/8” lock hex nut.
STEP 3. Insert the adjustment pin into the arm and the Adjustment Plate. Check the
alignment of all the adjustment holes, move adjustment plate as needed then securely
tighten the 5/8” spindle bolt and the 3/8” x 1 ½” bolt. Install the adjustment pin and secure
with 1/8” hairpin clip.