Yetter 2967-180 Residue Manager for 2959 Offset Injection Coulter - Manual (Page 9)

9
ASSEMBLY INSTRUCTIONS
STEP 5. CONT…
NOTE: During assembly be sure to align the grease-fitting hole in all the components to
assure proper lubrication of the bearing. Use a general-purpose grease before use of the
openers.
STEP 6. Fasten the R.M. wheel assemblies to the 2967-270 R.M. arm using 5/8” lock
washers and 5/8” hex nuts. Torque 150 ft.lbs. Adjust the bearing shield to top dead
center, rotated forward.
Torque 150 ft.lbs.
OPERATION