Yetter 2967-180 Residue Manager for 2959 Offset Injection Coulter - Manual (Page 8)

8
ASSEMBLY INSTRUCTIONS
STEP 4. Attach the 2967-181 Quick Adjust Assembly to the residue manager arm using
2) 3/8” x 3 1/4” bolts, 2) spacer bushings and 3/8” lock hex nuts.
STEP 5. Assemble the residue manager wheel to the hub and bearing.
NOTE: R.H. and L.H. wheel assemblies are needed.
IMPORTANT: 2527-530 washer must be installed or blade and hub assembly will fall off during use.