Yetter 6200-109 V-Close Wheel Kit CNH Row Unit - Manual (Page 7)

7
1
“V” CLOSING WHEEL ADJUSTMENT
CAUTION: Raise planter to transport position and install all
safety locks before adjusting closing wheels.
Angled closing wheels trail behind seed
opener to close seed trench left by
opener. Adjustable spring pressure
permits proper firming of the soil
beside seed runner rather than directly
above it. An eccentric bushing allows
centering of the closing wheel on the
row to properly apply pressure on both
sides of the seed when closing the
trench. When adjusted properly, the
closing wheels are centered.
NOTE: For clarity, closing wheel
assembly has been removed from row
unit.
Loosen bolts (A) that attach closing
wheel arm to wheel arm stop.
Rotate eccentric bushing (B) with
wrench to align closing wheel
assembly with center of seed trench.
Tighten bolts (A) that attach closing
wheel arm to wheel arm stop.
After setting planting to correct depth,
check operation of closing wheels.
The closing wheel must apply enough down pressure to close the seed