Flaming River Chevelle/El Camino Rack and Pinion 1964-67 - Manual (Page 10)

5) Install the new Flaming River sway bar
into the vehicle by using the factory
sway bar bushings and sway bar pins.
Tighten to factory torque specs.
Note:
The Flaming River Sway bar has been
designed to use the factory sway bar bushings
and pins. When installing the new sway bar
we recommend also replacing the bushings
(MOOG K8266)
and sway bar pins
(MOOG
K5227).
Flaming River Rack and Pinion Installation
New Sway Bar
9
Flaming River Industries
1-800-648-8022
FRxxxx Rev.A
12/22/10