Flaming River Impala Rack & Pinion Cradle Kit 1958-64 - Manual (Page 7)

8) Remove the bolts that hold the idler
arm bracket to the frame, the outer
tie rod ends from the spindle arms,
then remove the steering linkage
from the car.
7) Remove the bolts that hold the steering
box to the frame, and then remove the box from
the car.
9) Grind down lip on the driver’s side chassis
so it is completely smooth. This will allow
the cradle to mount flush onto the
car chassis
Before
**Lip is located on the inside of
the driver’s side frame rail**
After
6
Flaming River Industries
1-800-648-8022
FRxxxx Rev.A
12/15/10