Flaming River 5.0 Mustang Manual Rack & Pinion User Manual
Page 2
Flaming River Industries
Mustang Front Steer Custom Rack Order Form
1-800-648-8022 Toll Free
440-826-0780 FAX
Ref #:
Flaming River now offers the most popular custom rack sizes right from stock and all are with
the short pinion shaft.
Here are the sizes and part numbers in stock:
See page 2 for custom sizes already in stock.
(Example: FR1502-2x2 is 2” off of the center tube and 2” off of the rack gear.)
Mustang II Racks:
Overall Length
Pivot Point
Mounts
FR1502-2x2
43”
22.5”
14”
FR1502-2x2.5
43”
22.5”
13.5”
FR1502-3x3
42”
21.5”
13”
FR1502-4x4
41”
20.5”
12”
79-93 5.0L Racks:
FR1503-3x3
42”
21.5”
12.5”
71-72 Pinto
FR1501-2 40.5”
19.5”
Inner Tie Rod Ends
Unless otherwise specified all Mustang racks will have a 9/16-18 male inner tie rod end and
Pinto racks will have ½-20 male inner tie rod end.
Outer Tie Rod Ends (these fit 9/16-18 inner ends only)
FR1601
3.5” Overall length
FR1603
5” Overall length
FR1603-L
6” Overall length
Warranty Disclaimer
Because of their intended usage, the manufacturer makes no warranties whatsoever
expressed or implied, oral or written, to purchasers of their products regarding performance,
safety, fit, merchantability or length of service. Purchasers are responsible for selection of
proper goods and must rely on their own skill or judgment that such goods are suitable for
the purchaser’s application.
2