GReddy TURBO RELATED: Mazda RX7 1987-92 / BOV kit BRS-501 FC3S - Manual (Page 5)

－ 5－
(2) Install the GReddy Blow Off Valve<No.1>
to the adapter<No.6> using the provided
gasket<No.6>.
(3) Install the adapter assembly to the factory
air hose using the factory hose band.
(4) Connect the provided vacuum hose‹№4›
to the pressure source on the intake
manifold using the provided three way
fitting‹№5›
※ Make sure to connect to a pressure source
on the intake manifold after the throttle
body.
(5) Place the emblem ‹ № 7 › on the top
housing.
« « « «８９ ８９ ８９ ８９ and later models and later models and later models and later models» » » »
Connect the factory vacuum hose for the
factory air bypass valve to the GReddy Blow
Off Valve and plug the intake pipe with the
provided plug‹№3› as shown.
Vacuum hose
‹№3›
89 and later models 89 and later models 89 and later models 89 and later models
‹№8›
‹№2›