GReddy AIR INTAKE SYSTEMS: Lexus IS250 / IS350 2006-10 - Manual (Page 2)

Attach adaptor to housing using button head screws
provided. Attach trim seal to top of housing and cut out
for scoop.
10
Position housing in the engine compartment.
11
Secure housing using provided screws and flat wash-
ers and tighten using 10mm socket or wrench.
12
Install air filter and tighten using 5/16” nut driver.
16
Re-install all engine covers.
(Intake is shown with no plastic covers on)
17
Install intake tube with couplers and clamps provided.
Do not tighten.
13
Re-connect MAF sensor harness and crank case line.
14
Tighten all clamps using 5/16” nut driver.
15
Replacement Filter P/N:
61-90133
06-80507 Pg2
Accessories
Note: Filter Cleaning: When cleaning your TM
filter, be sure to use only “Restore Kit”
(P/N: TP-7015C TM cleaner only.)
TM cleaning:
see cleaning instruction sheet TF-9000I.
GReddy Performance Products
9 Vanderbilt, Irvine CA 92618
T: 949.588.8300 F: 949.588.6318
[email protected]
www.greddy.com
The installation of your Greddy Performance intake is
now complete. Please check all components and re-
tighten if necessary. Thank you for choosing Greddy!
18