GReddy AIR INTAKE SYSTEMS: Honda Civic Si 2006-11 - Manual (Page 2)

Install MAF sensor to intake tube using new M4 screws
provided.
10
Install air filter to intake tube and tighten using 5/16” nut
driver.
11
Install elbow coupler to throttle body and position
using clamps provided. Do not tighten.
12
Tighten down intake using provided flat washer, wavy
washer and M6 nut.
16
Tighten all clamps using 5/16” nut driver. Re-connect
MAF sensor harness and battery terminals.
17
The installation of your Greddy Performance intake is
now complete. Please check all components and re-
tighten if necessary.
18
With provided nylon spacer, place on air box mounting
point.
13
Install intake into vehicle and position tab to mounting
point and coupler.
14
With new 5/8” hose provided, attach to intake tube and
engine. Re-install vacuum line to new intake tube.
15
Replacement Filter P/N:
61-90130
06-80499 Pg2
Accessories
Note: Filter Cleaning: When cleaning your TM
filter, be sure to use only “Restore Kit”
(P/N: TP-7015C TM cleaner only.)
TM cleaning:
see cleaning instruction sheet TF-9000I.
GReddy Performance Products
9 Vanderbilt, Irvine CA 92618
T: 949.588.8300 F: 949.588.6318
[email protected]
www.greddy.com