GReddy AIR INTAKE SYSTEMS: Subaru WRX STI 2002-07 - Manual (Page 2)

Remove MAF sensor from stock intake.
10
Install MAF sensor on intake tube using M4 screws
provided. Attach couplers with clamps to intake tube.
11
Install and position new tube to throttle body and filter
adaptor.
12
Remove clips from upper half of air box. Attach onto
new cover.
16
Install cover and tighten using 4mm allen key. Attach
vacuum lines to cover tabs.
17
The installation of your Greddy Performance intake is
now complete. Please check all components and re-
tighten if necessary. Thank you for choosing Greddy!
18
Tighten all clamps using 5/16” nut driver.
13
Re-connect MAF sensor harness.
14
Install air filter and tighten using 5/16” nut driver.
15
Replacement Filter P/N:
61-90133
06-80505 Pg2
Accessories
Note: Filter Cleaning: When cleaning your TM
filter, be sure to use only “Restore Kit”
(P/N: TP-7015C TM cleaner only.)
TM cleaning:
see cleaning instruction sheet TF-9000I.
GReddy Performance Products
9 Vanderbilt, Irvine CA 92618
T: 949.588.8300 F: 949.588.6318
[email protected]
www.greddy.com