GReddy TURBO KITS: Scion tC 2004-05 / TD05-18G - Manual (Page 9)

3-5 Front exhaust pipe Installation
Install the factory front exhaust pipe to
the down pipe.
※ Use stock bolts and exhaust gasket.
3-6 Oil Return Connection
. Wrap the oil return hose with the
provided thermo cloth and install the
hose from the turbocharger to the oil
pan.
(Parts used #25, 33, 44)
3-7 Oil Pressure Line Connection
1. Remove the factory oil pressure
switch then install the oil pressure
union and the three way fitting as
shown.
(Parts used #18, 19, 20)
※Apply Teflon tape to the PT side
of the union fitting.
2. Connect the oil pressure line from the
turbo to the three way fitting.
(Parts used #15,16,17.)
※Install the oil pressure line to the
turbocharger using oil pressure
fitting, 1/8pt-M10 P1.25and
copper washers.
CAUTION
Improper connection of the oil pressure line
can damage the turbocharger. Take caution to
prevent teflon tape from entering the oil lines.