GReddy TURBO KITS: Honda S2000 (AP1) 2000-03 / T518Z User Manual
Page 27
Advertising
― 27―
3-17 Bumper and Under-Cover Modification
(1) The factory under-covers and fender liners need to be cut in order to accommodate the intercooler
piping. Cut the areas as shown.
Front engine undercover
Rear engine undercover
Passenger side fender liner
Driver side fender liner
(2) Cut the factory front bumper as shown to
accommodate the front mount intercooler.
(3)
Cut the front bumper side vents and secure the
piping to the bumper. (Optional step)
Advertising