Monoprice 9207 IP Camera Converter - Manual (Page 28)

MPEG-4 Video Server
3.11. SD-Card settings
The video server provides the recording of the video files into a standard Micro
SD-Card. Since this recording is directly to the SD-Card, there is no network packets
loss problem when recording to remote device through internet. The supported Micro
SD-Card capacity is up to 16G bytes.
Notice : when the video server is doing SD-Card recording, this is counted as one
video user. Please refer to appendix B about allowed maximum video users.
1. If the “Always Recording” is selected, the system will start to record to the
SD-Card immediately and keep recording always. If the “Schedule Recording” is
selected, the system will do the SD-Card recording according to the “scheduling”
in section 3.11. “Disable Recording” will disable this SD-Card recording.
2. When doing the SD-Card recording, the system will check the free disk space of
the SD-Card. If the disk space is full (no free disk space), the system will do
“Circular recording”( overwrite the oldest recorded files in the SD-Card ) or “Stop
recording” as selected.
3. SD-Card status – the SD-Card inserted or removed status is displayed here.
4. SD-Card files – as shown in fig.3-14, all the recorded video files with information
including file name and recorded time are listed in this page under the directory of
each date. The recorded file could be separately downloaded or deleted on this
page.
Figure 3-16: SD-Card Settings page
28