Monoprice 9207 IP Camera Converter - Manual (Page 48)

MPEG-4 Video Server
A: You can do the recording of the video/audio of the Video server from the
CamView software with the CamView software. You can also do the video/audio
recording to the standard NAS storage device. The micro-SD card slot is provided
for recording to micro-SD card. Another software CamPlay is needed to playback
the recorded vide/audio files.
8. Can I connect the video server product directly to my PC/notebook with an
Ethernet cable?
A: If the video server product is directly connected to your PC/notebook computer
using an Ethernet cable, the video server product will automatically use an IP
address called “auto IP” with IP address 169.254.xxx.xxx. If your PC/notebook
computer is configured to DHCP, it will also use an “auto IP” address. But this will
take about one minute after the video server product is connected to the computer
and you need to make sure that the WiFi interface on your PC/notebook computer
is disabled. After about one minute, you can run the CamView software to access
the video server product, the CAM ID should be displayed on the “auto-search”
list. You can then see the video by double clicking the CAM ID icon. But you need
to know that in this situation, other local or remote computer can not see the
video.
48