Night Owl PE-DVR16-1TB user manual - Manual (Page 28)

28
Chapter 14: Basic Menu
14.1 System Menu
The System Menu allows you to change the language, output
resolution,
logout time, and turn the Startup Wizard on/off. It is recommended that you
leave the Device Name and Remote ID fields at their default values. To
access the System Menu, select the Basic button, and then select
System
from the list on the left side of the screen.
•
Device Name: Displays the DVR you are using.
•
Remote ID: Indicates the number of the DVR if there are multiple
DVRs at one location.
•
Video Format: Leave this setting at NTSC unless you are using a
PAL-format TV.
•
HDMI/VGA Resolution: Select the resolution of video output from
the HDMI/VGA port. The larger the number, the better the resolution
will be. (However, a higher resolution will use more hard disk space
when recorded video is stored.) Refer to your TV/monitor manual to
see which resolution works best.