Outback Power Systems VFX Series International Programming Manual - Manual (Page 29)

28
ADV/FX/STACK--------P01
stack 1-2ph Master
phase
DOWN INC DEC PORT
Stacking the FX Series Inverter/Chargers begins
on this screen. See specifi c stacking procedures in
the next section.
ADV/FX/STACK------------P01
stack 1-2ph Master
phase
DOWN INC DEC PORT
Port 01 always takes the Master FX.
Pressing the <PORT> soft key changes the HUB
Port whose value you wish to adjust.
Pressing the <INC> or <DEC> soft keys
changes the stacking phase.