Outback Power Systems VFX Series International Programming Manual - Manual (Page 43)

42
ADV/FX/PG2---------------------
choose category:
PG1 GRID GEN PG3
Press the <PG3> soft key which leads to
the ADV/FX/PAGE3 screen.
ADV/FX/PAGE3-----------------
choose category:
PG2 AUX STACK PG4
On the ADV/FX/PAGE3 screen, press the
<AUX> soft key to adjust the AUX output
set points and operation.
ADV/FX/AUX--------------P00
aux output AUTO
control
DOWN INC DEC PORT
Selecting the <INC> or <DEC> soft keys
changes the mode of the AUX.
• AUTO allows the AUX to perform a selected
AUX OUTPUT FUNCTION, determined in the
following screens.
• OFF disables the AUX.
• ON activates the AUX regardless of the
selected function.
Press the <DOWN> soft key to select on an
AUX OUTPUT FUNCTION
ADV/FX/AUX--------------P00
aux output Cool Fan
function
DOWN INC DEC PORT
There are nine AUX OUTPUT FUNCTIONS:
• Cool Fan
• Divert DC
• Divert AC
• AC Drop
• Vent Fan
• Fault
• GenAlert
• Load Shed
• Remote
Pressing either the <INC> or <DEC> soft key
will bring up another AUX OUTPUT FUNCTION.
Pressing the <INC> or <DEC> soft keys
changes the stacking phase.