Outback Power Systems FLEXmax Extreme Owners Manual - Manual (Page 51)

900-0150-01-00 Rev A 49
MATE/MATE2 Screens
The MATE and MATE2 system displays can be used for monitoring FLEXmax Extreme activity. Not all
information shown in the MATE3 is equally available in the MATE.
Summary Screens
The Summary screens show real-time and accumulated system information. The FLEXmax Extreme Summary
screen appears at the bottom of the screen order.
Figure 50 Summary Screens
Charge Controller
Summary Screen
FLEXnet DC
Summary Screen #1
FLEXnet DC
Summary Screen #2
FLEXnet DC
Summary Screen #3
FLEXnet DC
Summary Screen #4
Inverter/Charger
Summary Screen
If a FLEXnet DC is
installed in the system,
the following summary
screens will be available.
If the FN-DC is not installed, this
will be the first Summary Screen.
The Charge Controller Summary
Screen shows many of the same
items as displayed on the Status
Menu of the MATE3. See page 30
for descriptions.