Posey Bed 8070 - Manual (Page 7)

Posey Bed - 8070 7
 Bed Assembly
3. Press firmly to seat the caster leg frame (Part J)
completely down into the wheel receiver
(Fig. 2-C).
4. Insert the caster leg frame (Part K-Foot Label)
into the wheel receiver at the foot of the bed.
NOTE: The caster leg frame (Part K) must be
placed in the wheel receivers located near the
bed motor (Fig. 2-D).
5. Press firmly to seat the caster leg frame (Part K)
completely down into the wheel receiver.
6. Secure the Caster Leg Frames onto the bed
frame, starting with either the head or foot,
using the square plugs (Hardware Packet C) (Fig.
2-E).
Caster Leg Frame Assembly
Materials:
• Hardware Packet C
• Parts J & K
• 9/16” wrench
NOTE: Bed assembly should be done near an
appropriate AC electrical outlet to assist with
assembly.
1. Lay the bed frame (Part P) on the floor, upside
down (Fig. 2-A).
NOTE: Bed motor will be located on the foot end
(Fig. 2-A).
2. Insert the caster leg frame (Part J-Head Label)
into the wheel receiver at the head of the bed
frame (Fig. 2-B).
NOTE: The caster leg frame (Part J) must be placed
in the wheel receivers opposite the bed motor.
Fig. 2-D
Foot
Side
Bed
Motor
P
K
Green
Frame
Padding
Fig. 2-B
P
J
Fig. 2-C
J
P
Fig. 2-A
Head
Side
Foot
Side
Bed Motor
P
J
K
O