Agilent Technologies N8201A User Manual
Page 101
Advertising
Preventive Maintenance
5
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
97
•
Turn the silver nut clockwise by hand until it is snug, then tighten with an 8 inch-lb
torque wrench (part number 8720-1765).
Bent Semirigid Cables
Semirigid cables are not intended to be bent outside of the factory. An accidental bend that
is slight or gradual may be straightened carefully by hand. Semirigid cables that are crimped
will affect system performance and must be replaced. Do not attempt to straighten a
crimped semirigid cable.
Advertising