Agilent Technologies N8201A - Manual (Page 50)

46 Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz
2 Hardware Setup and Configuration
Measurement Procedure
5 Tune the Spectrum Analyzer to the following:
• Frequency: 7.5 MHz
• Amplitude: 10 dBm
• Span: 100 kHz
6 Tune the downconverter to the following:
• Level: Attenuator: 20 dBm
• RF Enabled: Enabled
• Input RF: Signal Source: 50 MHz Cal
• Frequency: 50 MHz
7 Verify that a 7.5 MHz signal is present on the spectrum analyzer.