Agilent Technologies N8201A - Manual (Page 63)

Hardware Setup and Configuration 2
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 59
10 Change the DHCP and Auto IP radio-buttons to Off. Change the IP address, Subnet
Mask, and Default Gateway values to meet your network requirements.
11 Click Save to save the new settings. Parameters marked with an asterisk (*) also require
that you click "Renew LAN settings" before changes take effect.
N O T E
For the new settings to become effective, you may first cycle the power of the instrument
and then cycle the power of the PC.