Agilent Technologies N8201A - Manual (Page 29)

Software Installation 1
Agilent N8201A Performance Downconverter Synthetic Instrument Module, 3 Hz to 26.5 GHz 25
2 Follow the installation instructions and accept the default settings.
3 Click Finish.
4 Click Cancel on the Configure dialog box. This step will be completed later in the
process after restarting the computer.
5 Close the Agilent N8201A Performance Downconverter Software and Driver Installation
menu (driver_installation_list.pdf dialog box).
6 Click Exit CD-ROM. The software and driver installation is complete.
7 Restart the computer and continue to “Hardware Setup and Configuration" on page 27.
N O T E
Restart the computer!