AT&T 9340 - Manual (Page 19)

17
CALLER ID OPERATION
L2 L1
Battery status
indicator
About Caller Identification
This telephone has a Caller ID feature that works with Caller Identification
service provided by your local telephone company. There is a fee for this
service, and it may not be available in all areas. This phone can provide
information only if both you and the caller are in areas offering Caller
Identification service, and if both telephone companies use compatible
equipment. Depending on your service, you will be able to see the number,
or the name and number, of your caller. Additionally, if you subscribe to
combined Call Waiting with Caller ID service, this phone lets you see who’s
calling while you’re on another call (your telephone company must provide
the service needed for this feature to work). To turn off Caller ID with Call
Waiting, see the FEATURE SETUP section of this manual. The time and date
are sent by the provider, along with the call information.
Call Waiting
If you have Call Waiting with Caller ID service, the screen will display
information about your Call Waiting call when you hear the call signal. Press
F to access the call. Press F again to return to the original call.
NOTE: If you are using an extension phone when you receive a Call
Waiting signal, the screen displays MULTIPLE PHONES IN USE: NO DATA.
NEW CALL Light
This light on the base stays on when you have received call information but
have not yet reviewed it. The handset screen displays
NEW when showing
unreviewed call information as you scroll through the call history. If you
subscribe to voice mail service from your local service provider, see
“Message Waiting Indicator.” (If the light stays on even after you’ve reviewed
all calls, see IN CASE OF DIFFICULTY in this manual.)
Call Number
Unreviewed Call
information Repeat Call information
Voice
Mail Priority Call
Ringer
is off
Caller’s
Number
Caller’s
Name
Time
Date
Phone in use
AT&T 9340 book_1ATT 11/3/98, 12:40 PM 17