Batteries, Replacing the handset battery pack – AT&T 9340 User Manual
Page 23
Advertising
21
BATTERIES
Replacing the Handset Battery Pack
1
Remove the battery compartment cover on the handset by
pressing on the indentation and sliding the cover downward.
2
Lift out the old battery pack.
3
Hold the new battery pack and plug the connector into the
handset. Place the battery pack into the case.
4
Replace the cover by sliding it on its track up over the battery case
until it snaps firmly into place.
5
The new battery pack must be charged before using the
phone. Place the handset face up or face down in the base and
allow it to charge for at least six hours. The telephone might
operate before that, but for best performance, let the battery pack
charge fully.
AT&T 9340 book_1ATT
11/3/98, 12:41 PM
21
Advertising