Vaisala RDP100 - Manual (Page 8)

8. Optional: apply sealing paste to
the back frame of the housing
(where the housing meets the
wall when installed). Follow the
instructions provided with the
sealing paste you are using.
9. Insert the RDP100 housing in
the mounting hole. Make sure
the housing is straight, with the
direction arrow pointing up.
10. Attach the housing to the wall
with the screws.
11. Check the display to verify the
status. When the RDP100
starts up, it will search for a
compatible instrument on the
RS-485 line. When found, the
display shows what instrument
is connected.
6