Figure 9, Installing the transmitter, Figure 10 – Vaisala DPT146 User Manual
Page 25: Tightening with a wrench, Caution
Advertising
Chapter 4 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 23
1109-032
Figure 9
Installing the Transmitter
1109-033
Figure 10
Tightening with a Wrench
3.
Tighten the connection by turning with a wrench (max. 50 Nm).
CAUTION
Only tighten the transmitter from the 30 mm nut. Do NOT apply force to
other points in the transmitter body.
4.
Continue with the wiring of the transmitter. See section Wiring on
page 24.
Advertising