Vaisala Observation Display - Manual (Page 22)

User's Guide ______________________________________________________________________
Text Label Settings
You can configure text labels by using the following pop-up menu:
1012-048
Figure 6 Text Label Settings
Enter Text: Changes the text shown in the label.
Visible: Hides/shows the text label.
Graphs
The real-time graph displays up to 48 hours of observation data. Each
graph can contain one to six time series. You can access all graph
settings by right-clicking the mouse. Note that some settings are available
to administrator only.
1012-049
Figure 7 Graph Settings
Variables: Selects the variables to display. The graph supports up to six
different variables.
Line Width: Width of the line that connects the measurement points.
Marker Size: Size of the marker dot on top of each measurement point.
Y-Axis: This setting allows you to adjust the Y-axis settings. The graph
supports both automatic and manual scaling. When automatic scaling is
used, the graph adjusts maximum and minimum values so that all data
values within the graph are visible. When manual scaling is used, you
can set maximum and minimum values.
The left and the right Y-axis can be configured to use different scales.
20 __________________________________________________________________ M211326EN-A