Vaisala Observation Display User Manual
Page 43
Chapter 5 _______________________________________________________ Administrator's Guide
Clients must connect to the Observation Display PC at the port indicated
in the text box. For instance, to test a client Observation Display
connection from a client PC to a master PC:
1.
Make sure that the master Observation Display is running
connected to the AWS and receiving data.
2. Select
Distribute data to TCP clients on the master PC.
3.
On the client PC, open Observation Display and configure master
PC IP address into the Settings - Data Acquisition - Ip Address.
Enter master data distribution port (by default, 42222) in the port
text box.
4.
Save the client settings and select Connect from the terminal
window.
Data should appear on the client immediately after it has been received
on the server PC.
VAISALA _______________________________________________________________________ 41