Vaisala Observation Display - Manual (Page 34)

User's Guide ______________________________________________________________________
Editing Existing Layout
When the Layout Designer is open, you can select any screen element for
editing by clicking. The selected element is shown with small handles
around it as shown in Figure 14 below.
1012-056
Figure 14 Editing Existing Layout
Move the selected element anywhere on the screen by dragging it with
the mouse. Resize the element by clicking on any of the handles and
dragging the mouse.
Select a group box to move all the contained elements at once.
Copying, cutting, and pasting can also be used. These are available in the
pop-up menus and in keyboard shortcuts.
If you press CTRL-C or CTRL-X when an element has been selected, it
can be copied or cut, respectively. CTRL-V pastes the element to a new
location.
When pasting the element, the element is placed in the center of the
screen. To paste an element into a group box, select the target group box
before pasting. The pasted element appears in the center of the group
box.
Elements within a group box cannot be dragged outside the group box.
You must cut or delete elements to move them out from a group box.
32 __________________________________________________________________ M211326EN-A