Vaisala vLog 4.4 - Manual (Page 32)

Getting Started
26
To configure data loggers individually:
1. If you have not already done so, connect the logger to the PC.
2. From vLog, do one of the following:
• Select Logger>Setup.
• Press F11.
• Click the Logger Setup toolbar button ( ).
3. The Logger Setup window opens.
The information shown in the Logger Setup window relates to the data
logger connected to the COM port you have specified. Some fields shown
will vary depending on the model of data logger in use.
You can use this window to:
• Edit the data logger description.
• Set the sample timing.
• Enable or disable data logger channels.
• Link loggers to audit trail file.
Any changes will affect only the data logger currently connected to the
COM.
4. Click Close to close.
Understanding the Logger Setup Window
The following table describes the information displayed on the Logger Setup
window:
Description
Logger description (For information on configuring the logger description, see
Configuring the Data Logger Description on page 28 .)
Hardware Model Hardware model number of the currently-connected data logger
Hardware Revision Hardware version number associated with the currently connected data logger
Firmware Version Firmware version associated with the currently connected data logger