Vaisala vLog 4.4 - Manual (Page 47)

Veriteq vLog 4.4 User’s Guide
41
3. Click OK.
Configuring Data Loggers: Batch Setup
Before using this section, read Configuring Data Loggers, as you need to have
an understanding of the settings and choices you will make before using the
Batch Setup.
Batch Setup allows you to quickly configure several loggers with very similar
settings. For example, using Batch Setup, you can quickly apply identical log-
ger sample settings to all loggers in your environment.
To set up loggers in a batch:
First Logger:
1. Ensure a logger is connected to your PC.
2. Choose Logger>Batch Setup.
3. Click Refresh to update the COM port list with available ports.
4. From the Logger Batch Setup window, choose the COM port your logger
is communicating with and specify the number of COM ports in the range
of your batch setup. (Example: If setting up loggers on COM ports 2, 4,
and 6, the number of COM ports selected should read 5, not 3.)
5. To set logger sample timing settings, click Modify near Logger Sample
Timing Settings. In the window that appears, set start mode, stop mode,
sample interval, and so on. Click OK.
6. To set logger description, select the Modify checkbox and enter a new de-
scription in the Description text box.
7. If desired, enable or disable channels.