Vaisala vLog 4.4 - Manual (Page 55)

Veriteq vLog 4.4 User’s Guide
49
Transferring Logger Data to the PC
To transfer the information stored in one data logger to the PC:
1. Connect the data logger to the PC (see page 17).
2. Ensure that the COM port is configured (see page 25).
3. Ensure that you have write permission to the folder on the PC where you
are going to save the transferred files.
4. Do one of the following:
• Select Logger>Transfer.
• Press F12.
• Click the Transfer values toolbar icon ( ).
This starts the communications process between the logger and the PC and
opens the Transfer Wizard window.
5. Confirm that the current date and time shown in the window are correct. If
the date and time are not correct, use the Windows Control Panel to update
the date and time. See Setting System Date and Time on page 55.
Note: The PC's date and time must be correct when setting up a data logger, or
transferring logger data. Otherwise, the timestamp in the Logger file
may be incorrect.
6. Click Next.