Vaisala FD12P - Manual (Page 93)

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 93
Other Commands
TIME Command
The TIME command is useful for maintenance purposes.
To display the current system time, type
TIME
↵ ↵↵ ↵
The system output is, for example, the following:
10:11:12
To set the time, use the following command:
TIME hh mm ss ↵ ↵↵ ↵
where
hh
= Hours
mm = Minutes
ss = Seconds
NOTE Reset the time after a power break.
DATE Command
The DATE command is used to display the current date.
Type
DATE
↵ ↵↵ ↵
To set a new system date, use the command:
DATE yyyy mm dd ↵ ↵↵ ↵
where
yyyy =
Year
mm = Month
dd = Day