Aiwa XR-MG9 - Manual (Page 10)

10
En
This unit plays back finalized CD-R/RW discs as well as audio
CDs.
Playback
1 Press FUNCTION repeatedly (CD on the remote
control) to select the CD function.
2 Press z OPEN/CLOSE to open the disc
compartment.
Place a disc with the label side up.
Then close the disc compartment by pressing zOPEN/
CLOSE.
3 Press c to start play.
To stop playback
Press s.
To pause playback
Press a. Press again to resume playback.
To skip to the beginning of the current/preceding/
succeeding track
CD OPERATIONS
Press f or g repeatedly.
To search (playback in fast forward or reverse)
Hold down f or g. Release at the desired point.
To select a track with the remote control (Direct play)
Press the numbered buttons to select a track.
- To select track 25, press +10, +10 and 5.
- To select track 10, press 10.
To change the display in the playback mode
Hold down SHIFT and press DISPLAY on the remote control
during playback.
The display changes in the following order:
1 Track number being played and elapsed playing time
2 Track number being played and remaining time of play
3 Current volume level
•Remaining playback time cannot be displayed during
random playback or programmed playback.
Random/Repeat playback
Random playback plays all the tracks in random order. Repeat
playback plays all the tracks or the track being played repeatedly.
You can select random and repeat all playback at the same
time.
1 Hold down SHIFT and press RANDOM/REPEAT
on the remote control repeatedly to select one of
the following modes:
Repeat 1 playback: "" 1"
Repeat all playback: """
Random playback: "RANDOM"
Random/Repeat all playback: "RANDOM ""
2 Press c to start play.
To cancel random/repeat playback
Hold down SHIFT and press RANDOM/REPEAT on the remote
control repeatedly until "RANDOM", "" 1" or """
disappears.
Direct selection of the tracks with the numbered buttons
cancels the random mode.
To repeat a selected set of tracks
First select the tracks with programmed playback.
Then selects repeat playback. (See "Programmed playback"
on page 11.)
FUNCTION
z OPEN/CLOSE
a s c
f , g
VOLUME UP/
DOWN
DISPLAY
SHIFT
s CLEAR
a SET
VOLUME
(
N , M )
RANDOM/
REPEAT
0-10,+10
PROGRAM
CD
f , g
c PRESET