Adjustments before operation, Power, Volume – Aiwa XR-MG9 User Manual
Page 8: Demo, Eco mode
8
En
ADJUSTMENTS BEFORE OPERATION
Power
Turning the unit on
Press POWER 6 STANDBY/ON (POWER on the remote
control).
Alternatively, press TUNER/BAND (AUX or CD on the remote
control). Playback will start automatically if a disc is inserted.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Volume
Press VOLUME (UP or DOWN) (VOLUME (
N
,
M
)
on the remote control).
Adjust from 0 (minimum) to 30 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 17 or more, it is
automatically turned down to 16 the next time the unit is turned
on.
DEMO/ECO
TUNER/BAND
POWER
6
STANDBY/ON
T-BASS
z
OPEN/CLOSE
a
s
EQ
f
,
g
f
,
g
VOLUME UP/
DOWN
CLOCK
T-BASS
SHIFT
a
SET
POWER
VOLUME
(
N
,
M
)
TUNER/BAND,
AUX, CD
EQ/
QSURROUND
ENTER
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate the DEMO
Press DEMO/ECO. The clock flashes. For setting the clock,
see page 9.
ECO mode
Reduces power consumption with the following operations.
After clock is set, this unit allows you to regulate its power
consumption by displaying nothing on the display while the
power is off. This is called the power economizing
mode.
Press DEMO/ECO while the unit is turned on.
Each press of this button changes the display status as follows:
1 ECO ON: power economizing mode is activated.
2 ECO OFF: power economizing mode is deactivated.
When the power economizing mode is activated
"GOOD-BYE" is displayed for 4 seconds, and everything
on the display clears.
Only the red indicator on the POWER button lights to show
that power is being supplied to the unit.
Standby power consumption
When the power economizing mode is activated: 1.0 W
When the power economizing mode is deactivated: 12.0 W