AT&T 1070 - Manual (Page 43)

57
Caller ID operation
Call waiting and message waiting
CID with call waiting
If you subscribe to caller ID with call waiting
service and you receive a call waiting call, not
only will you hear the normal call waiting tone,
but
(CALL WAITING) will be displayed in the top
line of the screen. The caller information for the
incoming call will be displayed.
1. Press
[FLASH] to access the call waiting call.
2. To return to the original call, press [FLASH]
again.
Message waiting and NEW CALL light
This NEW CALL light stays on when you
have received call information but have not
yet reviewed it. If you subscribe to a voice
mail service, this light flashes when you have
unretrieved messages waiting. The screen also
displays information about the number of new
calls and voice mail messages waiting.
CID:100/198 Indicates 100 new caller ID entries
and 198 total caller ID entries.
L2 The call came in on line 2.
COVM There is voice mail “message
1 3 4 waiting" information on lines 1, 3
and 4.
NOTE: You have to set COVM ON to receive
notification of “message waiting” (page 41 of the
installation guide).
(CALL WAITING) L1
Chris Thompson
5550100
10:01AM 11/23
EXT 11
CID: 100/98 COVM
DTAD:16/20 1 34