AT&T 1070 - Manual (Page 51)

65
Appendix B
Time/date
When the telephone is idle, the screen will display
the date and time. The time can be set manually
or with incoming caller ID information. Even if
you have caller ID, you must set the year once
for voice messages to have the correct day of the
week.
1. Press [ENTER].
2. Press [ ] or [ ] until you see TIME/DATE.
3. Press [ENTER] to see YEAR. Press the dialpad
keys to enter the correct year.
4. Press [ ] until you see MONTH. Press the
dialpad keys to enter the correct month.
5. Press [ ] until you see DATE. Press the dialpad
keys to enter the correct date.
6. Press [ ] until you see HOUR. Press the dial-
pad keys to enter the correct hour (12-hour
clock format).
7. Press [ ] until you see MINUTE. Press the
dialpad keys to enter the correct minute.
8. Press [ ] until you see AM/PM. Press [ ] or [ ]
to highlight AM or PM.
9. To move to MAIN MENU, press [ ].
-OR-
To exit setup, press and hold [ENTER].
NOTE:
• Caller ID provides the time and date. Set the year
so that the day of the week can be calculated
from the caller ID information. After you set the
time once, it will be updated automatically with
incoming caller ID information.
The time will be set automatically only if you
subscribe to caller ID service provided by your
local telephone company (page 50).
TIME/DATE
= 2007
YEAR