Performance characteristics, Continued) – Agilent Technologies InfiniiVision 6000 Series User Manual
Page 21

21
Performance characteristics
(continued)
Measurement features
Automatic measurements
Measurements are continuously updated. Cursors track last selected measurement.
Up to four measurements can be displayed on screen at any one time.
Voltage (scope channels only)
Peak-to-peak, maximum, minimum, average, amplitude, top, base, overshoot, preshoot, RMS,
standard deviation (AC RMS)
Time
Frequency, period, + width, – width and duty cycle on any channel
Rise time, fall time, X at max Y (time at max volts), X at min Y (time at min volts), delay, and
phase on scope channels only
Counter
Built-in 5-digit frequency counter on any channel. Counts up to the scope’s bandwidth (1 GHz
max). The counter resolution can be increased to 8 digits with an external 10 MHz reference.
Threshold definition
Variable by percent and absolute value; 10%, 50%, 90% default for time measurements
Cursors
Manually or automatically placed readout of Horizontal (X,
∆X, 1/∆X) and Vertical (Y, ∆Y).
Additionally logic or scope channels can be displayed as binary or hex values.
Waveform math
One function of 1-2, 1x2, FFT, differentiate, integrate.
Source of FFT, differentiate, integrate: scope channels 1 or 2, 1-2, 1+2, 1x2.
FFT
Points
Fixed at 1000 points
Source of FFT
Scope channels 1 or 2 (or 3 or 4 on MSO/DSO6xx4A only), 1+2, 1-2, 1*2
Window
Rectangular, flattop, hanning
Noise floor
–50 to –90 dB depending on averaging
Amplitude
Display in dBV, dBm at 50
Ω
Frequency resolution
0.05/time per div
Maximum frequency
50/time per div
Storage
Save/recall (non-volatile)
10 setups and traces can be saved and recalled internally.
Storage type and format
USB 1.1 host ports on front and rear panels
Image formats: BMP (8-bit), BMP (24-bit), PNG (24-bit)
Data formats: X and Y (time/voltage) values in CSV format, ASCII XY and binary format
Trace/setup formats: Recalled
I/O
Standard ports
USB 2.0 high speed device, two USB 1.1 host ports, 10/100-BaseT LAN, IEEE488.2 GPIB,
XGA video output
Max transfer rate
IEEE488.2 GPIB: 500 kbytes/sec
USB (USBTMC-USB488): 3.5 Mbytes/sec
100 Mbps LAN (TCP/IP): 1 Mbytes/sec
Printer compatibility
Selected HP Deskjet, Officejet and HP PCL 3.0 compatible printers