CDN DSP1 - Dual-S ENsing Probe Thermometer/Timer EN - Manual (Page 4)

Precautions
• Always wear a heat resistant glove to touch the
stainless steel probe or sensor cable during or just
after cooking.
Do not touch with bare hands.
• Keep the battery, stainless steel probe and sensor
cable away from children.
• Clean the probe and dry thoroughly after use.
• Do not clean the case with abrasive or corrosive
compound, which may scratch the plastic and
corrode the electronic circuits.
• Do not subject the unit to excessive force shock,
dust, temperature or humidity, which may result in
malfunction, shorter electronic life span, damaged
battery and distorted parts.
• Do not tamper with the unit’s internal components.
Doing so will invalidated the warranty on the unit
and may cause unnecessary battery damage and
distorted parts.
• Do not subject the unit to excessive exposure to
direct sunlight. The unit is not waterproof — do
not immerse it into water or expose to heavy rain.
• Do not expose the sensor cable plug or the jack on
the case to water or any liquid, which will result in
a bad connection and faulty readings.
• To avoid deformation, do not place the unit in
extreme temperatures. Never burn the probe
directly over the fire. Do not use the probe when
the temperature is above 536°F/280°C. Doing so
will deteriorate the wire.
• Do not use the probe in a microwave oven.
• Always read the users manual thoroughly before
operating.
Specifications
Operating Range: 32 to 536°F/0 to 280°C
Display Range: 32 to 572°F/0 to 300°C
Temperature Alert: 86 to 572°F/30 to 300°C
°F/°C selectable
Power: 1 DC 1.5V size AAA
Timer: 10-hour count up/down timer