High Country Tek ProValve 100 Series - Manual (Page 22)

021-PV100 Rev A PV100 User Manual 22
Copyright © High Country Tek, Inc. – 2013
PV100
Valve Controller
Mode 3 and Mode 7: dual coil 2-speed control. DIN1 enables coil A, DIN2 enables coil B, DIN3 enables high speed.
AIN -96% commands both coils to
0A because Digital inputs are all
OFF. DIN1 is ON, DIN2 is OFF, DIN3 is
OFF, coil A is set to the Low/ovr
current setting of 0.3A. DIN1 is ON, DIN2 is OFF, and DIN3
is ON. Coil A is set to the maximum
current setting of 0.95A.