VariZoom VZCINEMAPRO-K5 - Manual (Page 10)

Mechanical travel: unlimited unless hardwired.
Camera Plate dimensions-
From Center mounting hole- tilt arm: 5” (with standard nodal line plate installed. This may be offset by
¼” or 1/8” with offset nodal line plates installed)
Camera plate has 2” of vertical adjustment for camera balancing.
Connectors
-
Cinema Pro Base connectors
Head power- 4pin XLR
Kuper Node- 6pin LEMO (red)
Controller- 7pin LEMO (green)
Video out- BNC
Tilt arm connector, front
Lens control- 16pin LEMO (orange)