VariZoom VZCINEMAPRO-K5 - Manual (Page 8)

4. Options and Specs
Additional Software- The Cinema Pro head can operate as a slave to Kuper Node motion control
software, and is also is capable of providing motion data for virtual set operation.
Data capture software is available, for data sharing. This will allow you to export the data from the
Cinema Pro to a personal computer.
Additional Head options-
The Cinema Pro head can be fitted with either a 100mm half ball, or Mitchell mount. A Mitchell ring
adapter is available for old style Mitchell mount.
An adapter is also available to adapt Mitchell mount to Jimmy Jib style mount.
Wireless control is available, and can controlled from up to ¼ mile. Up to 1 mile line of sight.
Additional controller cables are available in 50’ or 100’ increments. A male to female LEMO coupler is
available to join the cables.
Cinema Pro XLR power cables are available in 30’ or 75’ increments.
2” head extension blocks are available, and will increase the underslung clearance range from 16.5”-
18.5” to 18.5”-20.5”. A maximum of two can be installed. This will also increase clearance if using a
larger lens.
¼” or 1/8” nodal line offsets can be installed on the Cinema Pro’s camera mounting plate to line of the
center of the lens when necessary.