VariZoom VZCINEMAPRO-K5 - Manual (Page 12)

2 N.C.
3 N.C.
4 Camera Pos. Loop to Power Connector
*** WARNING: DO NOT POWER THE CINEMAPRO WITH ANYTHING OTHER THAN THE
INCLUDED FACTORY POWER SUPPLY OR YOUR WARRANTY MAY BE VOIDED. THE
UNIT MAY BE SEVERELY DAMAGED AND CAUSE DAMAGE TO YOUR CAMERA IF YOU
USE A NON-APPROVED POWER SUPPLY. IF YOU MUST POWER IT USING A BATTERY
SYSTEM, MAKE SURE THE SETUP IS APPROVED BY VARIZOOM AND EXECUTED BY A
QUALIFIED TECHNICIAN.
Cinema Pro Head - Base Connectors
1) Control Connector (green) – LEMO EGG1B307CLL
Pin Function Wire Color (Cable)
1 Common Brown
2 RS-422 TXD Red
3 RS-422 TXD! Orange
4 RS-422 RXD Yellow
5 RS-422 RXD! Green
6 24 VDC + Blue Power to Remote or Jibstick
7 24 VDC - Violet Power to Remote or Jibstick
2) Kuper Node Connector (red) – LEMO EGG1B306CLL
Pin Function DB9
1 Common 1
2 N.C.
3 RS-422 RXD (Kuper) 8
4 RS-422 RXD! (Kuper) 9
5 RS-422 TXD (Kuper) 5
6 RS-422 TXD! (Kuper) 6
3) * Optional - Camera Control Input Connector – EGG2B310CLL
Pin Function
1 Common
2 12 VDC out
3 Run Switch
4 Remote Enl
5 Remote Clock