Videoswitch Vi200 - Manual (Page 42)

Digital Recorder
36
12 Remote Keyboard
A remote keyboard may be connected to the Vi200 to provide control from another room.
Simply connect the VI200 to the keyboard using Cat 5 (or similar twin twisted pair cable).
Connect the keyboard to a monitor using a BNC co-ax cable. All the keys of the Vi200 are
duplicated on the remote keyboard and the Vi200 may be controlled in the same way.
If the keyboard is more than about 100 metres away from the Vi200, then the monitor
should be connected to the Vi200 separately via a BNC cable (RG59) to ensure best picture
quality. The CAT5 data connection should operate up to 500 metres.
The keyboard and monitor may control and view either the main monitor or the spot monitor
according a menu setting (see section 9.6.7).
Vi200
MONITOR
CO-AX
CAT5
Vi-K1 or Vi-K2
KEYBOARD
Digital
Recorder OUT MON
The remote keyboard can control and display either the
MAIN monitor or the SPOT
monitor. See section 9.6.7 to select one of these modes of operation.