Videoswitch Vi200 - Manual (Page 8)

Digital Recorder
2
1.1 Connecting Up
For a standard digital recording system you will need
The Vi200 recorder
Some cameras with lenses
A video monitor (with BNC composite video input).
BNC cables
Rear View
ALARMS / RELAY
MAIN
SPOT
ETHERNET
KBD
PSTN/ISDN
MIC
LINE OUT
LINE IN
AC POWER INPUT www.videoswitch.co.uk
2 1 4 6 8
3 5 7 9
Digital
Recorder
Connect the monitor output (MAIN) of the Vi200 to a Video Monitor using a BNC cable
Make sure that the monitor termination is switched on (i.e. to 75 Ohms)
Connect a camera to Camera Input 1 on the Vi200 using a BNC cable
Connect further cameras to Inputs 2,3,4 etc
Make sure that the voltage select switch is set to suit the mains supply. The setting
required in UK and Europe is normally 230Vac.
Connect the mains power using the mains cable provided