Digital recorder – Videoswitch Vi200 User Manual
Page 49
Digital Recorder
43
Microphone
3.5mm jack, -56dB, 20k Ohms, suits electret microphone
Line input/output
2 Phono connectors, -30dB level, 47kOhms
Audio sensitivity control
30db range, via menu
Audio bandwidth
3.2kHz (optimised for speech)
Alarm inputs
9 inputs, suits normally open volt-free contacts
Activity detection
8 x 8 zones, programmable sensitivity
Alarm relay
25Vdc, 200mA max normally open or closed
Alarm/activity response
Pull-up full screen display, maximum record rate
Event log
480 alarm, activity and system events
Incident list
Up to 4 incidents may be saved onto one CD
Keyboard data input
RJ45, RS485, 9600 baud (1 start, 8 data, 1 stop)
Keyboard video output
Twisted-pair video via built-in balun for connection to
remote keyboard.Main or spot monitor.
Watchdog timer
In the event of any unexpected condition, the system will
automatically restart
14.5.5 Remote
Viewing
PSTN/ISDN (option)
Adaptors are available for dial-up remote access
Ethernet
100baseT, TCP/IP, suitable for connection to broadband
router or LAN. Software supplied.
14.5.6
Power, Physical & Environmental
Mains Power input
90-135 Vac 2 Amps or 180-265 Vac 1 Amp, 47-63Hz
Temperature
5 to 35deg C (operating), -10 to 40deg C (storage)
Humidity
5 to 95% non-condensing
Dimensions/Weight (Unit)
165mm x 200mm x 310mm (WxHxD), 6kg
Dimensions/Weight (Boxed)
275mm x 380mm x 475mm (WxHxD), 8kg
14.5.7 Upgrades
Remote viewing Software
Remote viewing software (VDM Connect or Vi Connect) is
available on the internet: www.videoswitch.co.uk
Firmware upgrades
Future firmware upgrades will be made available on CD
and the Internet (free of charge)
Cameras Input Upgrades
The number of camera inputs may be increased from 4 to 9
via an upgrade CD (chargeable)
Hard Drive Upgrades
The capacity of hard drive that is recognised may be
increased via an upgrade CD (chargeable). Replacement
hard drives also available.