Videoswitch Vi-POSCON - Manual (Page 22)

Videoswitch 22 Pos601a.doc
Vi-POSCON Installation Guide
7.4 Setting the Currency Format
You can choose how the system displays currency amounts. The default setting is Decimal .
Highlight and click Currency Format on the SERVICE MENU. The CURRENCY FORMAT menu
appears.
Highlight and click the currency format you want the system to use. The SERVICE MENU reappears
displaying the selected format.
7.5 Setting the Printer Type
You can configure the system to print to a 40-column or an 80-column dot-matrix printer. The default
setting is No Printer.
Highlight and click Printer Type on the SERVICE MENU. The PRINTER MENU appears.
If you select either 80-column printer, the following menu appears:
In bitmap mode, the system sends characters to the printer as bitmaps. In code page mode, the system uses
the code page for the selected language to print characters.
Highlight and click the menu item that describes the printer connected to your system. The SERVICE
MENU reappears displaying the printer selected.
7.6 Displaying the Software Version
To display the current version of Vi-POSCON software, highlight and click Software Version on the
SERVICE MENU. The SOFTWARE VERSION window appears.
Click a mouse button. The SERVICE MENU reappears.
7.7 Setting the Unit Status
This option is future use. Only the Standalone option is currently available.
Decimal (1.23)
Integer (123)
CURRENCY FORMAT
No Printer
TM-U210, 40 Column Printer
TM-T88, 40 Column Thermal
LX-300, 80 Column Printer
LX-300+, 80 Column Printer
PRINTER MENU
Bitmap
Code Page
PRINTER MENU
(c) S.I.D.G. Limited
Part No. : SW-2420-01
Revision : ##
Click to continue
SOFTWARE VERSION